[svandamme]

so i'm busy working on a bathroom , zero experience.

axle grinded a cut in the ytong wall where i want the pipes to go

but since i don't know jack about pipes, i had to learn myself to solder copper water pipes

solderd some pipes with 1 T joint, and three 90 degree bends into a square
poured little bit of water in it and hooked up a pressure gauge to the side that was open.

then applied heat , saw pressure rise to well above the pressure i would get at the water mains...
no drips

mission accomplished.

So happy that i have my own house, with a big garage/workshop now... Can muck about with whatever i want... room for my tools, decent workbench...just need one more thing... can you guess what?