I'm thinking Fuel pressure Reg (FPR)
http://www.clarks-garage.com/
look up FUEL-07, Fuel Pressure Regulator - General Information and Replacement
But maybe fuel filter if not..
Also check your vaccum lines are not completly off going from Intake to FPR
Doubt injector problem.
You can lossen the big fuel line nut with a big rag under and crank to see if you're getting fuel pressure. If you have a big wet fuel rag. Change FPR of youf vaccum lines to it are not getting Vaccum.
__________________
1987 924S with 968 Drive front to back, Bilstein Insert on mod/stock Struts, 450# Hypercoils, 28mm Torsion Bars, Weltmeister Adjustable Sway Bars, Lindsey 968 Light flywheel, Spec Stage II Clutch, ToYO RA1's, Auto Power Cage & 6 pt Harness, KLA Strut Brace, Greasy hands, heavy foot, and lots of smiles
Last edited by JivenJim; 09-19-2009 at 05:00 AM..
|