|
Registered
Join Date: May 2009
Location: Hawkinsville / Perry, Ga.
Posts: 1,239
|
Hi Brian, I got to wondering if you have the plastic cowl piece that covers the Heater Blower and w/shield wiper trans gear? It runs from the battery to the fuse block aft of the firewall. You have to used a putty knife to run along the rubber firewall seal to remove it and take off the w/shield wiper arms. Mine crumbled when I had to take it off, but was already broken in several places. A guy I bought the rear seats from went to u-haul and got a long narrow box for the top part of the seat. I don't mind if it is cracked a little as a hot glue gun will take care of that.
Thank you,
Larry
|