|
no spark 965
debugging a no spark issue on a 1991 turbo. I stalled the car putting up on ramps before a major service and inadvertantly left the ignition on. Well the car was no start before service.
I have Batt voltage to the ez69 , both posts of the coil 1 & 15 light up a test light when cranking BUT one side does not flash.
coil pn 965-602-116-00-M14
The manual ohm for coil primary & secondary to center post ( - 1 = 5.0 - 7.2 ohm) and ( + 15 = 0.4 - 0.6 ohm ) . I have 9.75 for both primary and secondary to center post and 0.0 across 1 & 15 .
1. is that the correct value for the coil ? if so i have a bad coil
2. will an after market MSD coil work (has anyone tried it)
very little info on coils other than replace and see.
thanks,
Stefan
posted rennlist as well
|