|
I have installed one on all 4 cars there is trick, at least for me.
Stuff a rag under the crank to hold belt in place.
Clips are good for the oil gear take the belt and Driver cam gear with wrench and move it back and engage belt so it's tight and cam is still on mark.
Now just place the belt on a 1/4 of the way on the cam and use your clips and hold in place.
Route the belt and when you get to the passenger side by leaving it on 1/4 on the drivers side the belt can slide on a lot easier. Just push the belt on with your fingers a little on both sides until its centered on the cams.
Try it it works.
|