[Mookster]

2003, 966, C2 Cab

The suspension is the M032 (standard suspension). The vehicle has 17” wheels. All four tires were replaced at 49,500 miles.

I have had this vehicle for 3 years.

The vehicle now has 56,000 miles on the odometer. I am preparing to take the vehicle in for an oil change and the 60k service.

While in for regular servicing I need to address the suspension. Let me explain.

The left rear of the vehicle is sagging (base on the fender/ quarter panel wheel arch measurements) and it appears the left rear shock is showing its life. I have completed the rebound test and it does appear the shock still has life. When I drive over 70mph the front ends does feel like it is floating more then normal.

1. I realize if I replace one shock I need to replace the other side. If I just replace the shocks will I need to realign the vehicle?
2. I have owned two 911s prior to owning this vehicle. Will I need to corner balance/reindex and realign the vehicle if I just replacing the shocks?
3. I have replaced the rear shocks and strut inserts on my previous 911s. Is this a DIY job on the 996? Easier/harder?
4. If this is not a DIY job what is the reasonable labor time to replace the shocks/struts? What is the labor time to align and corner balance the vehicle?
5. If I need to replace the suspension I will be lowering the vehicle to Euro height. I will replace the suspension with either the M030 (Euro suspension) or the PSS10 suspension. Both kits are about the same price but it appears the M030 kit is more complete. Any thoughts on either kit? Does the install time differ between the 2 kits?
6. I heard a bout a front bumper diffuser that can be bolted to the front cover to produce more downward force. Does anyone know the part number? Is it worth it? I did attempt a search and did not have any luck.

I will NOT be tracking this vehicle. This is my daily driver. In this economy I do not want to throw a suspension kit on the car if it is not needed. However, I do not want to be paying for overlapping labor for alignment and balancing due to other parts failing in the near future.

I appreciate your input and thoughts. Thanks in advance.