|
Unconstitutional Patriot
Join Date: Apr 2000
Location: volunteer state
Posts: 5,620
|
Actually, he's referring to the sequence of events when your furnace is turning on. You're skipping steps to properly troubleshoot this. Could be your circuit board. Could be your blower motor. Could be the flame sensor, if you have an igniter. However, if your flame sensor is bad, the gas valve will close and the burners will go out.
You could pass over the troubleshooting and start replacing parts, hoping to get the right bit. You can dig in and start properly diagnosing the problem. OR, just call a repair guy.
|