|
Joetii-
Sorry to add to any confusion...? I am no expert by any means, just offering my dyno results. I had found many builders but no real actual dyno results on the 3.2L S/S combo with carbs/cams on the board so I thought it would be beneficial for others.
Making pure assumptions on what others have said on the board in other posts, maybe the hp peaks at a higher rpm due to the cam timing specs? John listed to set the cam timing to 3.8mm of overlap if I remember correctly. I believe the typical S cams are in the low 5s (at least my Webcam S-grinds were on my 2.7L, factory S cams are 5.2 or so). I didn't question it. But that may have possibly moved the peak hp curve up in the rev range by a few hundred revs? The graph shows all 3 pulls peaking at 6700 or so, but it is within 5hp of that from 6500-6900 rpm.
Just a guess at this point. I couldn't be happier, that's for sure. Very driveable and plenty of top end, would pull through to 7300-7500 if I let it I would guess.
Erik
|