|
Chris, I am at same point. Just finished "set up stuff" i.e., ER bushings on the
a-arms, new races in the hubs, got the o-ring and spacer on the spindle. (I didn't pull the rack) But I was going put the turbo tie rods in first since I think I need to use the room down there before the crossbar goes in. Next, I was going put the sway bar into the A-arms and then into the crossbar. Put on on the jack and lift it up as "one piece". Then Struts, rotors et al....Like to hear Jeff's logic please.
Sky
|