[svandamme]

remove front wheels, drop the nose, that will lift the backend
it might be a close call if you don't remove the rear valance, although without the fan, i think it might work

nose down is less of a problem for removal then it is for putting it back in there
Worse case, you bang the gear selecter rod on the opening it sits in.. and bust up the seal...cheap and easy enough fix though...ask me how i know..
But either way, as your picture shows, not high enough.

either way, your rear wheels must be well clear of the ground to be good.... then you remove em to have room to work.

Did you already remove the axles from the tranny?


And no, not going to stay over, i intend to high speed it back home when there's no traffic and not much 5.0 on the road.