Quote:
Originally Posted by pete3799
We have a winner!
Good answer Tony.
|
+10
Great idea!
Win-win: If it can be hammered in 4-5 mm, nothing more needs to be done.
If it only moves 2-3 mm, the hole created will prevent the small drill from wandering off when drilling deeper for the right depth.
lindy 911:
Good point about some light grinding.
I had hopes that it could be loosened with penetrating oil, center punch, small file picking-tool and pulled with a magnet but it sounds like it's tighter than expected?
The torque required for the M12 pulley-bolt is 59 ft-lbs but more than doubles (125 ft-lbs
) with A/C. So, if it isn't tight enough, the dowel is stressed and becomes a shear-pin.
__________________
1980 Carrerarized SC with SS 3.2, LSD & Extras. SOLD!
1995 seafoam-green 993 C2, LSD, Sport seats.
Abstract Darwin Ipso Facto: "Life is evolutionary random and has no meaning as evidenced by 7 Billion paranoid talking monkeys with super-inflated egos and matching vanity worshipping illusionary Gods and Saviors ".
