[Cocacolakidd]

+1 for the use of an adjustable fuel pressure regulator, one that has 1:1 rising rate for the boost (A must).

+1 for the use of a AFR gauge (A must).

Please remove the PVC because when it is heated above 130 deg. F. it starts to boil off Chlorine Gas - very caustic to aluminum and human lungs.

If you must use the plastic piping use CPVC as it will hold it's chemical composition and strength through 250 deg. F. - Then it becomes brittle and cracks and does not emit poisonous gas (out-gassing of polyvinyl softeners above 250 deg. F.).

Loved the idea of an Oil Pressure Gauge for Fuel Pressure (That's a $300.00 savings) Now to find an oil pressure gauge that says pressure only.

PS: never mind all of the ladies grumping over the back fence - they are never politically correct when a new neighbor arrives.