[ONQRACIng]

to clarify, the M48 ECU has only one output for ignition, so there is an 8 channel expander being used (MOtec IEX), and from there the 6 outputs leads will feed the 2-3 channel ignitors, which in turn will fire the 6 plugs in the single plug application in sequential mode, then I can add the lower coils, and split the respective ignitor feed to fire the lowers in waisted mode..
Whew.. OR I may grab the 997 coils, unload the ignitors and just run them off the expanders 6 channels split.. Just looking for fit info on the 997 coils on air cooled heads/valve covers..