|
Geez, gas lines are easy. You just need to use soapy water to check for leaks afterwards. Gas is not high pressure.
Sweating pipes is easy. Get one of those pipe end cleaners, sort of like the cleaner for a battery terminal. Flux on both side. Heat with a propane torch and it will smoke, touch solder and it will suck into the joint. Easy.
This is definitely a DIY job, probably a 2. Unless it is stuck in some inaccessible location.
__________________
James
The pessimist complains about the wind; the optimist expects it to change; the engineer adjusts the sails.- William Arthur Ward (1921-1994)
Red-beard for President, 2020
|