Quote:
Originally Posted by tadel001
How do you remove/install pilot bearing? What about the grease?
|
I hope you have the Bentley SC Repair Manual. If not, get it.
The pilot bearing sits in the center of the flywheel; remove, clean, inspect, replace if necessary and lube with EP2 grease or Moly.
Remove the guide tube (Picture #3) and replace the O-ring inside. Lube the outside of the guide tube and the inside of the release bearing and the splines on the input shaft.
Dismantle the cross-shaft (Picture #4), inspect the bearings and seals, replace if necessary. Clean and inspect the fork for wear and cracks.
The Bentley explains terminology of the parts with pictures and what to lube.
Judging by the grime and dirt, the disc and release bearing may need replacing?
Does the disc still have enough life left on the lining?
Release bearing still smooth?
How many miles on the clutch?
Make sure to engage the fork into the release bearing when assembling.
__________________
1980 Carrerarized SC with SS 3.2, LSD & Extras. SOLD!
1995 seafoam-green 993 C2, LSD, Sport seats.
Abstract Darwin Ipso Facto: "Life is evolutionary random and has no meaning as evidenced by 7 Billion paranoid talking monkeys with super-inflated egos and matching vanity worshipping illusionary Gods and Saviors ".
