|
Richard,
Do you have a flywheel on the car now? If so, what is wrong with it? If you already have a flywheel and you are doing a clutch job then have the thing resurfaced at a good machine shop. They will be able to tell you if it needs to be replaced. I had a flywheel for a 3.2 resurfaced with no problems. There is a Porsche memo floating around that says do not resurface a flywheel. This is because if too much material is removed from the flywheel there may not be enough room for a rubber centered disk to fit between flywheel and pressure plate. If you are installing the noisy spring centered disk then it is not an issue.
|