|
Do not take too seriously
Join Date: Dec 2006
Location: Netherlands
Posts: 3,453
|
No way you are going to be able to remove the wheel with the K13 can. You will need to undo the hanger on the rear peg to turn it out for the wheel to clear. On the K12 you only have about half an inch clearance between the can and the tire. This is more than enough and no need for concern, but it is not sufficient to remove the wheel.
Bike runs fine, and jumps in the rpms. BUT, due to the *****e weather here I have not had the chance to ride it yet. I'll let you know when I finally can take her out again.
__________________
BMW R1100S 'Bumble Bee' | HyperPro 3D F&R | motoyoyo clamps | Staintune | some other bits
BMW K1200S 'tri-color ICBM' | WP ESA rebuild to specifications | lots of other bits
http://www.sport-touring.eu | http://eurotravel.photos
|