[Chuck Moreland]

Leleand

You are describing the exact problem I experienced.

There are three places that can limit adjustment range.

The limiting factor in my case was the size of the "big hole" in the tower and material was removed as shown to open it up, maybe 1/8 inch or so.

The next likely factor as pointed out by others is the bottom of the plate running into the side of the tower. I don't think you can fix that one except by going to camber plates (fyi, keep a future eye on those crafty boys at Elephant for a slick solution!)

The other place that can limit travel is the holes for the camber plate bolts. Those holes can also be opened up a bit if needed.

You just need to look and see which of these items is your limiting factor.