View Single Post
DavidH DavidH is offline
Registered
 
DavidH's Avatar
 
Join Date: Dec 2000
Location: St. Louis, USA
Posts: 129
Leland,
Whatever you did please let us know the results. I just replaced front A-arm bushing (Thanks Chuck Moreland - Excellent article, I added the zerks as well), New neatrix in the rear, new torsion bars 21/26, turbo tie- rods and a bump steer kit. Also lowered her to 25 in the rear and 25.5 in the front.
I've been up to my elbows for a week. Oh not to mention fixing the steering bushing and putting a short shift kit in.

I was going to the alignment shop this weekend myself and would be real interested in the results.
I did some searching and had written down some target numbers I was going to set to :
Front - Toe (0), Camber (-1 deg), Caster 6 deg.
Rear - Toe(-15 minutes), Camber (-1deg)

I'm open for any comments, the car will be used on street and has 7 & 8 Fuchs with 205/55 R16 Front and 225/50 R16 Rear, Tire pressure at 32 front and 35 rear.

I would love to have some feedback as well. Thanks folks...
__________________
78 3.2L CIS 911SC
Old 08-22-2002, 07:17 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #17 (permalink)