|
Schleprock
Join Date: Sep 2000
Location: Frankfort IL USA
Posts: 16,643
|
Your engine and trans mount bolts that go into the chassis are 58 ft-lb
M8 CV bolts are 30 ft lbs dry & clean as possible. Highly recommend you use the serrated spring washers called Schnorr belleville spring washers
Heat exchangers and all other exhaust nuts & bolts are M8 = 18 ft-lbs. Be VERY careful on the heat exchangers because old studs can very easily break. Just get them snug and don't muscle-up on them.
__________________
Kevin L
'86 Carrera "Larry"
|