Wise move, you will not regret it. Also looking at the pictures you should have some lateral movement in the brackets to push the engine and tranny foward. I jacked up the engine lightly and used a pry bar and pressure to "wiggle" the engine and tranny where I wanted it. After doing so I re-tightened the cradle bolts and drilled my holes in the cradle for the anchor bolts.
Quote:
Originally Posted by Rebel911
I took this coming Friday off to put a good 8 hours under the car. The intake is just sitting on the engine for clearance visuals I am looking for a new aftermarket intake to put on there when its time.
i will be pulling the tranny for sure. i don't like that it is so dirty compared to the engine. Further I can flush out the tranny oil completely.
thanks for the ideas, please don't hold back i can take constructive criticism.
|