|
Dave as far as I know there are no rebuild "kits" for H1's don't know about H4's. The clip's and rubber grommet's with hole you should be able to fabricate if you can't locate with a 'want to buy'. Lens seals are available for both. Rebuild on H1 is not hard but time consuming even after you have done your first one 2+ hours first time an hour or so from then on. A couple of thing's that will help is take only 1 apart at a time so you will have the other to reference, also you DO NOT need to remove the cable on the one adjuster screw as described in some posts you can get in with a small tool, just unclip it and cable and attached screw will come out with the other 3 screws on the trim ring. As for adjustment screws there was a thread here or on Early S reg a while back they are not available from what I remember and guys were rolling their own in various ways.
|