Quote:
Originally Posted by LM3929
Peter
If you are going by what I said earlier about JB weld or plastic welding. they are two different procedures.
One is JB Weld, a two part epoxy that can be used to glue the parts back together or actually welding the plastic together or you can reform the part if a piece is missing with a plastic repair kit like the one that Eastwood sells.
If you need a deflector I can sell you mine, my car has been off the road for eight years now so a few more days won't matter.
Lorne M.
|
Hi Lorne
Thank you kindly for the helpful tips.I have read them and will keep them in mind if and when I use a commercial product described.I have jury rigged the deflector somewhat and will give it a go.What I have done is this.The broken bottom tag on the deflector snapped off leaving a small ridge above it.I have built a foundation on the the rear of the projecting alternator bolt the one open for the air deflector tab to fit over(broken one)...here just a sec..This picture should give you a better idea about what I'm talking about.Thank you very much for you offer of selling me your deflector.It's appreciated.
Best regards,
Peter
..it's my car doctor,it's worrying me!