[kmakovac]

Torque tube bearings!

There are four 6006z or 2z bearings in an iron frame with outer seal.
Easy to fix,but you must remove the tranny,all the exaust sistem,starter,sleave cylinder and the harder:disconect rear breake line and put down a little the entire rear axle(clarence for put out the torque tube)

With the torque tube out i sprayed inside with a soap emulsion to put out easy the bearing assembly.Change in the same time the pilot bearing,posibly do a clutch job and if you want an aluminium flywheel-sublime for this cars!(this engine must to rotate a big flywheel,two very heavy balance shaft and a heavy torque tube).This is good for a tractor deisel!!!