|
What i did was install the axle and all bolts (just snug them up for now) then remove them one at a time, spray some blake clean in the hole, clean the bolts and reassemble.
The gaskets should fit in the wheel/trans. flange and also between the CV boot and CV.
__________________
Pete
79 911SC RoW
"Tornadoes come out of frikkin nowhere. One minute everything is all sunshine and puppies the next thing you know you've got flying cows".- Stomachmonkey
Last edited by pete3799; 05-07-2010 at 09:37 AM..
|