|
abit off center
Join Date: Feb 2002
Location: At the Airport Kentwood, MI
Posts: 7,311
|
Got a little work done on the case. One head was loose and worked the cylinder into the case so it had to be machined flat again. I took off .020 and will use the same thickness base gasket for this one side. Next is to flycut and rebuild the heads. I ordered all the parts, it only came to about $450 with all new p&c's lifters, oil pump and all the other goodies.
__________________
______________________
Craig
G2Performance
Twinplug, head work, case savers, rockers arms, etc.
|