|
an extended slide release will extend the lever to about half way down the plunger. I'm not fond of them and ambi safeties are a waste if you aren't a lefty.
There are 2 levers that make up the series 80 mechanism in the frame and obviously the rod in the slide. Take the levers out and run em over a 10k+ grit stone a few times. That smoothed it out a good bit for me. there are blanking kits out there too, but don't just pull the levers out or you'll seriously screw your weapon up, you need spacers in their place and something to plug the hole in the slide is a good idea as well.
Looks like a nice weapon, be sure to run it hard then clean the hell out of it and give us a report.
|