[cvwcr32]

Yes , the complete drive train is used.The 914 drive shaft with a T2 100mm cv on the inner for the right side and a long drive shaft from an auto T2 for the left side.The shifter cables run under the engine into the tunnel and the shifter is mount on an aluminium base plate bolted to the floor in front of the handbrake lever(yes it has been converted to right hand drive and they put the h/b lever in the middle).Dansk extractors were fitted and 2 small cats with a single muffler and standard looking tail pipe for the stealth look.6 cylinder welmeister rear springs with coil over shocks make it easy to adjust ride height.
Keep you posted with more updates and pics soon.