Okay, so my 1982 928S has been down for quite some time now. I ended up taking the Pod off and disconnected the Starter Switch and the damn Wires fell from the 14-pin connector, and now I do not know which slots they rest in.
I have these wires:
1 Yellow Wire
2 Black Wires
2Black/Yellow Wires
1 Gray Wire
2 Red Wires
1 Red/Black Wire
Someone from another board was able to provide me with a diagram of the placements, but the colors of the wires were incorrect.
I really need to get this all back together. She has been sitting for far too long, and before I finish the interior, I need to make sure she runs!
http://forums.rennlist.com/rennforums/928-forum/544052-ignition-switch-not-turning.html
That is the previous board thread in which I was posting. I couldn't find any way for the 928 to start up, so this is why I went as far as disconnecting the starter switch from the 14-pin connector.