|
Registered
Join Date: Aug 2001
Location: Brighton UK since 11/2012
Posts: 3,170
|
If the bolt goes through the hole in the steering knuckle and the groove in the new ball joint pin then it is correct. Before you intsall the bolt, look into the steering knuckle bolt hole and check that the ball joint pin groove is lined up with the hole and that's all you have to do...................
__________________
From November 2012; Precision Porsche Specialist
Sussex UK, +44 (0)1825-721-205
2001-2012 Gerber Motorsport Inc. 206-352-6911
07.15.06 1996 Ducati 900SP. Suprisingly enough, it's red
08.16.09 1999 Kawasaki ZRX1100. Green.
|