|
Registered
Join Date: May 2002
Location: Portland, Oregon
Posts: 12,715
|
For your narrow section, why not cut a plate of Aluminium and put a few pieces of channel on the back side to get the height right and add strength.
An alternative is to remove the excess material from the middle and use a channel or H beam to reattach the halves together. Notch the ends so the plate fits flush and provides some support for the break.
__________________
Harry
1970 VW Sunroof Bus - "The Magic Bus"
1971 Jaguar XKE 2+2 V12 Coupe - {insert name here}
1973.5 911T Targa - "Smokey"
2020 MB E350 4Matic
|