|
Registered Abuser
Join Date: Jul 2007
Location: Southwest Montana
Posts: 2,738
|
You can manually pulse the MIG gun one second bursts two inches apart and make small tacks.
Avoid putting too much heat in one area (Burn-through)
On the thin stuff I place a strip of copper behind the weld it sucks the heat out.
Aluminum works almost as well. Mild steel will not stick to either. It has a learning curve, be patient and practice on scrap first.
__________________
MT 930
1987 930 - Gone but not forgotten
A man with priorities so far out of whack doesn't deserve such a fine automobile.
I would rather wake up in the middle of nowhere than in any city on earth - Steve McQueen
американский
|