|
My problem was that I could not get either the wires to come out of the connector nor would the connector come out of the flag. The red end of the connector came off, note it does have numbers on it so you can see which wires/colors correspond to the number. The issue was once this was off, the wires would come out, but then threading in the wires back into the connector was not easily done. The wires have to go down the neck of the flag, and into the correct 1/16" hole in the connector. I know it would be doable if the connector comes out of the flag, but I could not get my connector loose. Ran out of time and patience. Good luck to all who try, I would like to know how the connector comes out.
|