|
Pull off the rubber nipple on the door contact. Use an 11mm socket to remove the contact, the take a small wire brushe to the back side of the contact. It will be obvious which parts need wire brushing.
As to the steering wheel squeaking, it's your horn contact. Pop off the center of your wheel. Remove the 27mm nut that attaches the wheel to the shaft. Grab the wheel and wiggle it back and forth till it pops off the shaft. Lubricate the horn contact. Reassemble.
Note: Use a center punch to mark the wheel and steering shaft so that you get the wheel back in the correct place.
__________________
'69 911E coupe' RSR clone-in-progress (retired 911-Spec racer)
'72 911T Targa MFI 2.4E spec(Formerly "Scruffy")
2004 GT3
|