|
In the Fires of Hell.....
Join Date: Oct 2007
Location: Phoenix, AZ
Posts: 3,779
|
That bracket has the sleeve on it. What Peter is showing is how to notch out the bell housing so that you can get the sensors and bracket out without having to loosen up/remove the bell housing.
Of course you need to remove the bell housing once in order to notch it 
Good luck, Keith
__________________
PCA Instructor: '88 951S - with LBE, Guru chips, 3Bar FPR, 1.3mm shimmed WG, 3120 lbs, 256 RWHP, 15 psig boost
|