[redz350]

Many thanks to targamania for the tip to use contact spray to get my power seat switches working again. I tried this yesterday and it worked like a charm. All I had to do was remove the trim panel around the switches and then spray contact cleaner around through the little whole which is then visible on the top of the switches. It took me a few applications of the spray and a fair amount of time for the spray to do it's complete job, but I now have fully functioning switches. Don't be put off if you just get a thunking sound at first, when using the switch. That's what happened with one of my switches. It doesn't necessarily mean that the seat motor is broken. As I said one of my switches did this at first, but after some time went by the switch and the seat motor worked perfectly. Thanks again targamania!!!