[adot]

Hey Scutty

Yes, out with the level screw will deepen the bowl level. I once screwed mine IN all the way and bent the brass metal plate that the level screw hits. And when I backed the screw all the way out(in my hand out) I still had no gas comming out the sight hole because the float was stuck down. Had to pop the top carb plate and fix(after I thought it was the fuel pump$100, I did this to both carbs).

Try setting all idle screws all the way out , mix 2 out, and go from there with the 2k idle trouble. maybe bad dist?

GoodLuck
Brett