|
remove modeling clay from a spoon
Have a spoon of the 10/22 variety that I've been projecting on. Latest is to bed the receiver and first few inches of barrel.
Per many instructions on the intarwebz I used modeling clay to block off areas that I didn't want bedding stuff into to avoid mechanical lock, etc. Got most of it off/out but I still have some in various nooks and crannies of the receiver and underside of the barrel.
So what can I use to help dissolve/wash out the remnants of the oil based modeling clay? Something oil based (WD40) or something oil removing like carb or brake cleaner?
__________________
“IN MY EXPERIENCE, SUSAN, WITHIN THEIR HEADS TOO MANY HUMANS SPEND A LOT OF TIME IN THE MIDDLE OF WARS THAT HAPPENED CENTURIES AGO.”
|