|
Registered
Join Date: Dec 2007
Location: The Netherlands, Heemskerk
Posts: 344
|
By the way ...
The most important reason to install a Rapidbike module was the poor engine performance low in revs ... idle to 3000 rpm !
Standard bike ...
It felt like you had to give more throttle to drive away then needed (poor air/fuel mixture)
also on slow roundabouts I had to go back in first gear and with slipping clutch, traffic-jam driving was also with slipping clutch otherwise it looks like you driving a rodeo bull 
Higher in revs there was no problem at all, just fine and powerful
Bike modified ...
Not the power boost, because at the end it gives not a massive HP gain high in revs !
But the smooth ride low in rpm, the handeling of the engine from idle to the red zone woww
the smooth power delivering from idle,
comming out of corners in second or thirth gear where you can go back to 2000 rpm and put on full throttle 
that is why I like the Rapidbike !!!
__________________
Jack
R1200S HP2 Sport 03-03-'09 (#1012) ABS,edit;Full Akra+RapidBike 137,3 HP/132,4Nm
R1200GS Adventure '07,WP-EDS(up-dated to EDSII) edit;laser headers+RapidBike
All gone R1100S '01,BBP-chip,K&N,Lasers,no cat 100.2 HP,K100RS 16v '91,R80/7 '78,R60/5 '74
Last edited by Stampertje_35; 08-24-2010 at 08:11 AM..
|