|
Pre-fabs are failry simple--almost like a giant erector set.
Not all pre-fab mfgs. use a pre-drilled panel--Butler is the only large one that I can think of that does--they also use pre-drilled steel.
Check some other mfg. to see if you can get an erection manual from their websites.
Butler
Chief
American Buildings
You will want to make sure you use guy wires/cables to rbace the erected steel sections as you go--saw an installer almost collapse (4) bays by not following this advice.
Some mfg. require that you be a certified erector--meaning that you attend training at their facility to become certified.
Nothing all that difficult to build--some just have goofy details that must be followed or the mfg. can void any warranty they provide--yes they will send isnepctors with feeler gauges/mirrirs, etc. to check it was erected properly.
I disgaree with the " slime-ball low-life" comments above. Truly NOT the case.
__________________
Eric
83 911SC/83 944
bunch of Honda 750s
69 Chevrolet C-20 Longhorn (family heirloom)
|