Quote:
Originally Posted by mproseusa
I added coolant to the reservoir and bled the cooling system as instructed in the owners manual (did not need to add coolant after). Took the beast out and made a few "gentle" acceleration runs. Those runs did not cause the Central Warning light to come on. However a couple of WOT runs did turn the light on, AND the coolant temperature Light (at the top of the temp field) did come on. But only briefly. The engine coolant temperature was in the normal range. The COOLANT light at the bottom of the Coolant/Fuel Gage did not come on. That could be due to a burnt bulb, but I'm only guessing. I think I have a coolant system problem, but not sure what it is. Any ideas?
How does one "see" the windshield washer fluid level? All I can see is the filler neck, and through the fender well back to ???
Best regards,
Mike
|
Hi
On the washer fluid level....you CANNOT see it ever.... the bottle is under the inner wing behind the wheel shield and cannot be seen....and its HUGE , it contains around 2 gallons when full,,,, what you do is keep adding washer fluid and water to the filler neck .. until it overflows...
Then you know its full lol...
Hope this helps ..
All the best Brett