|
for the coolant i would first replace the heater control valve and the short hose this is a common failure point also replace the cap,
and inspect the bottle for cracks.
top off the fluid in the washer if you dont know if it will hold try filling with water first see if it holds .
As an aside to the washer tank try this,
remove the tank and remove the metal collars in the fill tube and the tank inlet then wash out the tank this will remove all of the rusty crud in the bottom of the tank so it wont plug your washer jets
__________________
^^^ Stan ^^^ 2019 BMW K1250 GS 2016 HD RK
1988 S4 Auto , Elfenbein Perlglanz, Pearl Gray
1982 5sp Met black and tan sport seats
Last edited by Mrmerlin; 09-09-2010 at 03:12 PM..
|