[356robo]

I've followed the process to adjust webers outlined in numerous threads. Here's my background and question:

floats ok, accel pumps ok, linkage disconnected, idles at about 900.

Using a Redline synchrometer and adjusting the idle air correction screws, all barrels were adjusted to flow showing "4" on the synchrometer EXCEPT #2. It shows about 4.75 with the screw turned all the way in.

Is there something wrong with #2 or should I adjust all the other barrels to match #2? The others are turned out several "1/8" turns.

Thanks,
Rob