[1QuickS]

Hi James,

Is your 3.0 cammed different from stock? If so then what is your source for emulsion tubes or did you use the stock Zenith one? Anderson's recommendation for a stock 3.0 with 40mm Webers was a F3 tube. Also, did you adjust the high speed enrichment feature?

I'm working a set of Zeniths now and am learning. By the way, the accelerator pumps have a pretty elaborate parallel actuator rod with spring loaded plain bearing (teflon) cam follower which places a fair bit of radial load on the throttle shaft. At least they have bronze bushings supporting the three throttle shafts which is better than the teflon bushings Weber began using in 1967.

Thanks,

Paul Abbott