|
Registered
Join Date: Feb 2010
Location: Fort Collins, CO
Posts: 818
|
What voltage should I be reading at WUR plug?
Today I was testing my WUR and wanted to make sure the heating element was working. I measure resistance of ~25 ohms across the WUR pins, but when I measure the voltage across the plug that connects to it, it basically read zero. Is it supposed to be 12V? I measured with car off and on, both times it was zero. The engine was hot though. Does the power not flow to the heater if engine is hot, or do I have some wiring problems?
__________________
81 -930
82 - Austin Mini 998
78 Mini 1275cc -totaled
83SC Euro w/77 3.0 Carerra Eng.--sold
Several other daily drivers not worth mentioning...
|