|
Registered
Join Date: Aug 2001
Location: Brighton UK since 11/2012
Posts: 3,170
|
There are three different ways of tightening the cylinder head, dependant on engine type.
BTW, why are you working on the 944 without proper information being available? There are numerous other torque settings required. Valve height must be measured or the hydraulic lifters will not work correctly. If the head is machined below a certain thickness you will need a different head gasket..etc, etc.............
__________________
From November 2012; Precision Porsche Specialist
Sussex UK, +44 (0)1825-721-205
2001-2012 Gerber Motorsport Inc. 206-352-6911
07.15.06 1996 Ducati 900SP. Suprisingly enough, it's red
08.16.09 1999 Kawasaki ZRX1100. Green.
|