|
Registered
Join Date: Jul 2008
Location: Cape Town, South Africa
Posts: 702
|
Cam Timing Confirmation
Hi guys,
I just want to confrim that what I have read I am understanding. So 3.0L SC engine with 964 cams, overlap at TDC should be 1.26mm. I have read that advancing the cam timing slightly will bring power on lower in the rev range. I want to have power come in around 2000 to 2500 rpm. Therefore what is the recommended overlap? I have read it can be up to 1.4mm however I was thing more like 1.3mm any ideas on where that would bring the power in? I dont care about losing power in the high range just want some oomph lower down?
__________________
Davy
82 911 SC Targa Sold
12 Audi A5 Sportback 3.0 TDI Quattro
03 996 C4S
|