|
also note the new MC may have a longer piston this will reduce the amount of push and then it will result in a dragging clutch,
the thing to do it swap the pistons and put the new seal on the old piston..
OR cut the tip of the new piston off
cut off about 4 to 5 mm of the tip but measure first,
also measure the MC spring make sure its not binding at full push,
I have seen the springs shatter and destroy the MC and slave seals from spring shards,
the solution cut a wind or two off the spring
__________________
^^^ Stan ^^^ 2019 BMW K1250 GS 2016 HD RK
1988 S4 Auto , Elfenbein Perlglanz, Pearl Gray
1982 5sp Met black and tan sport seats
|