|
Again thanks to the originator of this post. Same damned thing happened to me on my 2000 C2. Bought the switch from Pelican replaced it and fixed the issue.
Some things to note on the C2 with Tip, I removed the screw which holds the air vent just to give me a little more room to work. I could not turn the switch with my fingers so I used a long needle nose pliers to free it up. I also could not turn the new switch to get it started so I put it into position and using the pliers pushed forward and then turned it just a bit. I was then able to finish turning it with my fingers.
The wire harness should be removed before taking out the switch. Again very easy but I had to use a small flat screw driver to lift the clips, one on each side to release it. The wire harness is keyed so you cannot put it back on wrong.
This is an easy fix but expect to climb into the hard to get to space under the steering wheel.
Chris
|