|
you split the engine from the bell housing not the TT .
disconnect the drive shaft flex plate from the flywheel ( auto).
If you have a 5 speed then you remove the clutch pack,
put 3 U shaped pins under each of the pins sticking out the backside of the PP before you loosen the PP bolts,
this will make removing the release arm off the ball easier as well as installation
__________________
^^^ Stan ^^^ 2019 BMW K1250 GS 2016 HD RK
1988 S4 Auto , Elfenbein Perlglanz, Pearl Gray
1982 5sp Met black and tan sport seats
|